产品概述：Product Overview

FBIC自吸磁力泵是应用现代磁力学原理，利用永磁体的磁力传动实现扭矩的无接触传递，采用外混式轴向回水结构设计，就是电机带动外转子（即外磁钢）总成旋转时，通过磁场的作用磁力线穿过隔离套带动内转子（即内磁钢）总成和叶轮同步旋转，由于介质封闭在静止的隔离套内，从而达到无泄漏抽送介质的目的，泵体由吸液室、储液室、蜗壳、回流孔、气液分离室等组成。泵启动后在离心力的作用下，吸水室中的剩余液体与进液管路中的空气被叶轮搅拌成气水混合物，混合物经蜗壳进入气液分离室，随着流速的减慢，导致气水分离，空气由泵出液口排出，液经回水孔返回泵内，经过多次循环，进液管道中的空气被排净，使泵内形成一定的真空度，达到自吸的作用，解决了机械传动泵的轴封泄漏，而设计的全密封、无泄漏、无污染、强自吸、有效节能的新型工业用泵。

FBIC self-priming magnetic pump uses the principle of modern magnetic mechanics and the magnetic transmission of permanent magnet to realize the non-contact transmission of torque. It adopts the external mixed axial backwater structure design, that is, when the motor drives the outer rotor (i.e., the outer magnetic steel) assembly to rotate, the magnetic force line passes through the isolation sleeve to drive the inner rotor (i.e., the inner magnetic steel) assembly and the impeller to rotate synchronously. Because the medium is enclosed in the static isolation sleeve, The pump body is composed of a liquid suction chamber, a liquid storage chamber, a volute, a return hole, a gas-liquid separation chamber, etc. After the pump is started, under the action of centrifugal force, the remaining liquid in the suction chamber and the air in the liquid inlet pipe are stirred by the impeller to form an air-water mixture. The mixture enters the gas-liquid separation chamber through the spiral case. As the flow rate slows down, the air-water separation is caused, the air is discharged from the pump outlet, and the liquid returns to the pump through the return hole. After several cycles, the air in the liquid inlet pipe is discharged, so that a certain vacuum degree is formed in the pump, achieving the role of self-priming, It solves the leakage of the shaft seal of the mechanical drive pump. It is a new industrial pump with full sealing, no leakage, no pollution, strong self-priming, and high efficiency and energy saving.

性能参数表：Performance parameter table: